CSI-2 MIPI camera modules
CSI-2 cameras are compact board-level modules that connect directly to the host processor over a MIPI CSI-2 interface, streaming raw sensor data with minimal latency and overhead. They are designed for embedded platforms such as Raspberry Pi, NVIDIA Jetson and other SoC-based systems where the host handles image processing, computer vision and AI workloads. Sharing the same high quality sensors and optics as the USB models, CSI-2 versions provide higher bandwidth, better synchronization options and tighter integration with custom hardware. This makes them a strong choice for products where you control both hardware and software stack and need reliable, long term available camera modules integrated directly into your design.
C3 USB camera
See more in the dark. A 33 × 33 mm Aluminum cube with a standard CS lens mount and Sony IMX462 Starvis sensor delivers clean, low-noise 1080 p @ 60 fps straight over USB-C. Pick RGB or Mono and swap the front filter (IRCUT / full-spectrum / 850 nm). Manual UVC controls, M3 holes on every side and optional tripod mount make integration simple.
C2 USB camera
New C2 family camera C2_USBC with Sony Exmo R Starvis IMX290 sensor offers h.264 / MJPEG / YUY2 compressions over USB interface.
C1 MICRO USB Camera M12
C1 MICRO is a compact USB camera designed for applications where size, weight, and straightforward integration are critical. Its small form factor makes it suitable for embedded systems, mobile platforms, and space-constrained installations. The camera operates as a standard UVC device, allowing direct use on common operating systems without custom drivers. Onboard video encoding reduces USB bandwidth requirements and host CPU usage, which is beneficial for continuous streaming and low-power systems.The camera is built around the Onsemi AR0330 CMOS sensor with a native resolution of 1920x1080 pixels and supports video output up to 30 fps. Available output formats include H.264, MJPEG, and YUYV. C1 MICRO connects via USB and is compatible with Windows, Linux, macOS, and Android through UVC. Manual image controls include exposure, gain, white balance, and related parameters. It uses an M12 lens mount, enabling a wide selection of compact lenses. The lightweight design and minimal dimensions make it suitable for embedded vision, machine vision, and portable devices.
USB camera C1 PRO
C1 PRO is an industrial USB camera intended for embedded systems and long-term operation where predictable behavior and simple integration are required. It provides Full HD video output using standard UVC interface, allowing use without custom drivers on common operating systems. The camera includes onboard video encoding to reduce USB bandwidth usage and host processing load. A CS-mount lens interface enables the use of a wide range of optics depending on the required field of view and application.Camera is based on a Sony IMX290 CMOS sensor with a native resolution of 1920x1080 pixels and supports frame rates up to 30fps. Video output formats include H.264, MJPEG, and YUYV. Connection is via USB with UVC compatibility on Windows, Linux, macOS, and Android. Image parameters such as exposure, gain, white balance (2800–9300K), gamma, and backlight compensation can be manually controlled. A 650nm IRcut filter is installed by default. The enclosure measures approximately 40x40x23mm, weighs 53g, uses a CS-mount lens thread, and has an IP40 rating. The specified operating temperature range is –50°C to +85°C, non-condensing.* Not recommended for new installations. See C2 and C3 family USB cameras.